• NDI®|HX Compatibility with POE (Power Over Ethernet)
• 1/2.8″ CMOS Sensor
• 1080/60P Resolution/Frame Rate
• Fast, Stable, & Accurate Auto-focus
• Silent PTZ Motor Mechanism
• 5.5-11mm Varifocal Len with 20x Zoom
• HDMI, SDI, Ethernet, RS-232, RS-485, & Audio-in Connectivity
• 2D/3D Noise Reduction
• Purchase of Additional NDI HX License NOT Required

OTTICA™

The OTTICA™ PTZ Video Camera from Ikan features a 1/2.8″ CMOS sensor and 5.5-110mm varifocal lens               with 20x zoom to capture videos at a maximum resolution of 1080p at 60fps. It supports POE (802.3af), HDMI,          SDI, Ethernet (NDI|HX), RS-232, RS-485, and audio-in connectivity. The camera uses a step drive motor       mechanism and motor drive controller for smooth and noiseless PTZ operation. In addition, it supports H.264/H.265 video compression and AAC, MP3, and G.711A audio compression formats.

CAMERA PERFORMANCE

Advanced ISP processing algorithms provide vivid images with a strong sense of depth, high resolution,                      and fantastic color rendition. The OTTICA supports H.265/H.264 encoding which makes motion video fluent and          clear even with less than ideal bandwidth conditions. A full-bandwidth NDI 1080p x60 fps video data stream uses approximately 100Mbps, whereas a video data stream using NDI|HX only uses around 10Mbps (approximately               1/10th of full-bandwidth NDI), which is a significant reduction in bandwidth required for sending the video data        stream through the network.

SUPERB HIGH-DEFINITION IMAGE

The OTTICA employs 1/2.8 inch high-quality CMOS sensor and supports resolutions up to 1920×1080 with                 frame rates up to 60 fps. Supported outputs include HDMI,3G-SDI, wired LAN (NDI|HX), and wireless LAN          interfaces. The 3G-SDI will work up to 100 meters in distance with transmission at 1080p60 format.

VARIABLE OPTICAL ZOOM LENS

The camera includes a 5.5-110mm f/1.6-3.5 varifocal lens with a viewing angle ranging from 3.3° to 54.7° and              offers 20x optical zoom.

AUTO FOCUS TECHNOLOGY

The OTTICA™ employs an autofocus algorithm that ensures the len’s focusing performance is lens fast,                accurate, and stable.

LOW NOISE AND HIGH SNR

The Low Noise CMOS effectively ensures the camera’s high SNR. Advanced 2D/3D noise reduction technology               is also used to further reduce the noise while ensuring image sharpness.

QUIET PTZ

By adopting a high accuracy step-driving motor mechanism, the OTTICA™ performs smoothly and quietly                   even when moving quickly to any position.

LOW-POWER SLEEP FUNCTION

The OTTICA™ supports a low-power sleep/wake up function. The consumption is lower than 500mW while                         in sleep mode.

RS-232 CASCADE FUNCTION

The OTTICA™ supports RS-232 cascade function which is convenient for installing. One cable is included                       in the box.

255 PRESETS POSITIONS

You can program up to 255 preset camera positions (10 presets by IR remote).

CONTROL CAMERA OVER IP THROUGH WEB CLIENT

After using “Advanced IP Scanner” to find the OTTICA’s IP address, input the camera IP address in the                        URL bar of your browser and click the “Enter” button to proceed to the Web Client login page. This web                       client will allow you to control various parameters including pan, tilt, zoom, exposure, shutter speed, focus,                     color temperature, sound, preset positions, compression format, resolution, bitrate, framerate, noise reduction, character displays, and many more.

SUPPORTS MULTIPLE CONTROL PROTOCOLS

VISCA, IP VISCA, PELCO-D, PELCO-P, ONVIF protocols are supported and can also be automatically               recognized right out of the box. The OTTICA can be directly controlled from either within software like OBS,               using NDI|HX, or from the Web Client using the camera IP address in a browser tab.

Optional hardware controller sold separately HERE.

WALL MOUNT INCLUDED

The included OTTICA PTZ Camera Wall Mount will support the OTTICA camera using a 1/4″-20 screw                           on the bottom. Attaching the camera and mount directly to the wall will provide you with a sturdy long-term             mounting solution. Additional wall mounts can be purchased HERE.

Note: The bottom piece is flat and ensures support for any sized camera with a 1/4″-20 thread.

NOTE:

Ikan’s OTTICA cameras do not require the additional purchase of an NDI License to use and/or operate.               Licensing is already included in the camera pricing.

The OTTICA camera is NOT compatible with any Black Magic Design ATEM Switchers at 1080p 60fps.

Shipping Weight (lbs): 6
Shipping Dimensions (in): 15 x 12 x 10

What's Included:
1 x Power Adapter
1 x RS232 Cable
1 x IR Remote Controller
1 x Wall Mounting Bracket
1 x RS485 Connector
1 x Cascade Cable

Quick Start Guide: OTTICA Downloadable PDF

Aspect Ratio: 16:9
Audio Output: Yes
Auxiliary Power: Yes
Base Connection Type: 1/4"-20 Screw Mount
Brand: Ikan
Color Temperature: 2400k - 7100k
Control: IR Remote Controller, PELCO-D Protocol, PELCO-P Protocol, VISCA Protocol
Data Output Interface: NDI|HX, 3G-SDI, HDMI, RS-232, RS485
Digital Resolution: 1920x1080p
Focusing: Auto, Manual
Input Audio Format: 1/8"
Inputs: 1/8" Audio, RS-232 Cascade, DC12V, 
Motor Type: Step-Driving Motor Mechanism
Noise Db: SNR >55dB
Output Video Format: LAN, HDMI, 3G-SDI, 1080p60, H.264, H.265
Output Voltage: DC12V
Outputs: RS-232, RS485, 3G-SDI, HDMI, NDI
Remote Control: IR Remote Included
Resolution: 1080p 60fps
UPC Code: 847983031610
Viewing Angle: 3.3° - 54.7°
Voltage: DC12V