BLITZ 3000 3G-SDI/HDMI WIRELESS VIDEO TRANSMITTER AND RECEIVER KIT
Model: BZ3000
- Uncompressed w/ Zero Delay Wireless Video
- Designed with Ikan’s Quick Mount System
- 3G-SDI and HDMI Inputs and Outputs
- Up to 4,946 ft. Line of Sight Range
- Best Performance within 3,000 ft. Range
- Uncompressed 10-Bit, 4:2:2 Video
- HDMI to SDI Cross Conversion
- Transmitter Supports Sony L Series Batteries
- Receiver Supports V-Mount Batteries
- Supports up to 4 Receivers connected to 1 Transmitter
BZ3000
The Ikan Blitz 3000 is the latest addition to the Blitz family of wireless transmitters. With the BZ3000, we added a high gain panel antenna to increase the range to 3000 feet. The Blitz features uncompressed, zero delay wireless video in a lightweight affordable package. With a 3000 foot range, this system is perfect for those professionals that are in need of ultra-long range wireless video.ZERO DELAY AND 3000 FEET OF RANGE
The Blitz supports zero delay video transmission, which means that it can be used in situations where timing is critical. It features a 3000 foot range to give you the freedom to move about without having to worry about losing signal.UNCOMPRESSED VIDEO
The Blitz 3000 Pro sends uncompressed video and has zero delay because the system doesn’t waste time compressing and uncompressing the video. The Blitz supports up to 1080 60p uncompressed video.
BLITZ TECHNOLOGY
INFERIOR TECHNOLOGY
INPUTS AND OUTPUTS
Whether you are using HDMI or SDI, the Blitz has you covered. It supports both HDMI 1.3 and 3G-SDI so you get uncompressed high definition video up to 1080 60p. The Blitz systems are also capable of cross converting whatever signal you are feeding them. For example, you can go from SDI to HDMI or HDMI to SDI.
BATTERY POWER
To keep the system light and the cost of use low, we include the necessary battery plates with the Blitz. They come pre-installed and allow you to power the units easily and reliably. The transmitter uses the Sony L Series style batteries and the receiver relies on a V-Mount battery. The units also include 2-pin LEMO compatible power connectors so you can supply power externally with the included P-Tap cables. This allows you to use the same pro batteries that are powering your camera to power the Blitz as well.
DURABLE, RELIABLE, AND EASY TO USE
The Blitz 3000 Pro is made out of durable machined aluminum and is extremely easy to set up.
You don’t have to mess with complicated menus or setups with its simple-to-use wireless channel
selection switch. Just power on the units and they will sync in about 20 seconds or less. The transmitter
is small and lightweight so it can be mounted just about anywhere like to your camera’s shoemount.
The receiver can be used with or without the panel antenna. This allows you to get more compact when
you don’t need the full wireless range. The receiver features five external antennas to ensure a strong
signal as well as 4 signal strength LED indicators.
THE COMPLETE PACKAGE
The Blitz 3000 Pro ships inside of a durable hard case to make transporting easy. The case holds the panel antenna and the complete wireless system with accessories. This includes an articulating arm, clamp, and shoemount to help you mount the system. Two P-Tap to LEMO compatible cables are also included to give you more power options. With the Blitz system, you always get the complete package.
Shipping Weight (lbs): 22
Shipping Dimensions (in): 21.3 x 9 x 18
What's Included:
1 x BZ1500 Transmitter
1 x BZ1500 Receiver
1 x Blitz High Gain Antenna
1 x Light Stand Adapter with Washer
1 x Base Plate
5 x High Gain Antenna Extension
1 x Power Adapter
1 x Articulating Arm
1 x Case
Quick Start Guide: BZ3000 Downloadable PDF
Antenna:
Frequency Range: 5.0 - 5.9 GHz
Gain: 14 ± 0.5 dBi
(F/B Ratio): >25dB
Isolation: >26dB
Horizontal Beam Width: 40 ± 5º
Vertical Beam Width: 40 ± 5º
V.S.W.R.: <2.0
Polarization: 5 ports: 3 ports vertical, 2 ports ± 45º
Maximum Power: 100W
Impedance: 50 ohm
Operating Temperature: -40ºF ~ 131ºF (-40ºC ~ +55ºC)
Connector Type: 5 x N-K
Lightning Protection: DC Ground
Antenna Dimensions: 12 x 12 x 0.9 in. (305 x 305 x 25mm)
Material: ABS
Weight: 4.3 lbs (1.97 kg)
Rated Wind Velocity: 36.9 m/s
Audio Output: SDI Embedded 4 Channel 24-bit / 48KHz
Band: 40MHz
Compliance: FCC, CE
Dimensions:
Transmitter: 115 x 67 x 23 mm
Receiver: 182 x 127 x 24 mm
Frequency Bands: 5.1 - 5.9 GHz
Input Audio Format: SDI Embedded 4 Channel 24-bit / 48KHz
Input Video Format:
Transmitter:
HDMI: 525i, 625i, 720p 50/59.94/60, 1080i 50/59.94, 1080p 23.98/24/25/29.97/30/50/59.94/60
SDI: 3G, HD, and SD-SDI (Auto Selected)
SMPTE-259/274/292/296/372/424/425
Input Voltage: Tr7-16.8V DC
Interface:
Transmitter:
3G-SDI Input (BNC Female)
HDMI Input (Type A Female)
2 x Antenna Ports (RF-2 SMA Male)
DC Input (4 pin LEMO compatible Female)
Receiver:
3G-SDI Input (BNC Female)
HDMI Output (Type A Female)
DC Input (4 pin LEMO compatible Female)
Modulation Mode: OFDM 16QAM
Operating Temperature: 0°C ~ 40°C (Operating)
-20°C ~ 60°C (Storage)
Output Video Format:
Receiver:
HDMI: 525i, 625i, 720p 50/59.94/60, 1080i 50/59.94, 1080p 23.98/24/25/29.97/30/50/59.94/60
SDI: 3G, HD, and SD-SDI (Auto Selected)
SMPTE-259/274/292/296/372/424/425
Power Consumption:
Transmitter: <6.5W
Receiver: <7.5W
Receiver Sensitivity: -75 dBm
Signal Indicators:
Transmitter:
Power: Green / Video: Yellow
Receiver:
Power: Green; Wireless Signal 5 x Green / Video: Yellow
Transmission Power: Max 21 dBm
UPC Code: 847983023288